If the setup and usage is made simpler, as sbc-cnc does, this should not be a challenge even for novice/begginers

Please use wifi numeric keypad and you can do the same. Please refer machine settings control tab for more information. https://www.amazon.in/SmartTech-SmartPhone-Accounting-Financial-Applications/dp/B07M93X8YN/ref=asc_df_B07M93X8YN/?tag=googleshopmob-21&linkCode=df0&hvadid=397065400743&hvpos=&hvnetw=g&hvrand=854101570516146236&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9062136&hvtargid=pla-812326405150&psc=1&mcid=cb8a1d63b87c3bf2a8ce0ace9305def9&ext_vrnc=hi&gclid=CjwKCAjwi_exBhA8EiwA_kU1MqT1eykGJXEhU5AtjiBB7E5n-swlxypKF1ticxK-slvxS9TPAKQ_aBoCncAQAvD_BwE Thanks SBC-CNC Team

You can use numeric keyboard for doing all major operations without mouse or keyboard. This is similar to XHC WHB04B. Please check machine setting, control tab for more information. Thanks SBC-CNC Team

Not tested from our end. But can work given the specs are sufficient for sbc-cnc software to run. You can download the free software and test yourself. Thanks SBC-CNC Team

Hello Guy Bahar, As of now SBC-CNC supports only raspberry pi since it is widely used and famous. We can support other boards but there's no major requests coming. We don't have sudo apt install. There are dependent softwares to install which makes installation complex. So to make it very easy, we provide the comple installation raspberry pi img. This way anyone without experience in linux can use the software. Thanks SBC-CNC Team

Hello Brett, Z-probe has been added to set Z-Zero. Thanks SBC-CNC Team

Hello Brett, The main Idea is to keep the cost low and pi4 is the obvious choice. Will keep you posted when pi5 version is available Thanks SBC-CNC Team.

Not supported in the current version. certainly in plan to implement in the future. The documentation is bit old. Lot of updates have been added to the software recently. Please check the videos.

Hello Jigsey's, If your CNC Machine is running with stepper motors, you need to just procure Stepper drivers for each motor. Please refer SBC-CNC Documentation for more information. SBC-CNC Team

Hello Jigsey. You just need stepper drivers and Raspberry pi 3B Or 4. There is no need of any additional controller. SBC-CNC Team

Hello Fabio, Thanks for showing interest in SBC-CNC software. Yes, we can customize the software as per your requirements. You can reach me @ +91-9845809792 on whatsApp.

Nothing John. It will take a while.

So you were in India! Bangalore changed a lot over the time. But the torrential rains are the same. It used to be referred as garden city, but now it is the silicon valley of India.

Thanks John for a fair review. I will go through your suggestions. I was actually getting feedback from small scale cnc machine builders in India. The software was initially written for diy customers. I wanted to introduce a new concept of not using G-Code for at least two axis machines. As the software evolved over time I have added more functions to cater for small scale machine builders. Currently because of lockdown here, my associates are not able to run the machines to generate training material. We will sort this out as soon as possible. Thanks

Hello John. Thanks a lot for the effort and time you invested in evaluting my software. I am still curious what made you think it's complex. I will be glad to send you a free license to check all the functionalities if you are interested. The software is built to keep things easier. I will be posting few videos soon to show how easy to control diy machines with this software. Anyway, thanks for your time and best of luck with your work too.

Hello John. The software/breakout board don't support analog control.

The application will not fill the screen. It's a fixed size application. But you should be able to move the application within the screen. The aspect ratio 4:3/16:9 can be adjusted by modifying config.txt Could you share a photo of your issue? We will try to reproduce here and suggest a fix. Also share your monitor resolution. Thanks

Hello John. The software is developed for all types of screens with minimum resolution of 1400X900. You might need to change your screen resolution in raspbian. Refer the following article. https://pimylifeup.com/raspberry-pi-screen-resolution/ For the black borders please refer below article. Let me know if you are able to fix it. It's a common issue with raspbian operating system. http://martinpennock.com/blog/how-to-remove-black-border-from-raspberry-pi-display/

Hello Ankit, Yes with the breakout board, you can use SBC-CNC for industrial machines. The breakout board provides optical isolation, 24V I/O and much more.

Hello Ankit, SBC-CNC software supports maximum 1.5MHz pulse frequency. Example: for 0. 001mm pulse resolution you can achieve maximum 1500mm/sec linear feed. As your pulse resolution reduces, the max feed increases.